Industrial Dehumidifier 320 Pints / Day 277V Anden
$ 4,695.95
Features
- Control: On-Board digital with diagnostics
- Air supply orientation: Horizontal
- Filter: 20″ x 22″ x 2″ MERV 11
- Refrigerant: R410A
- Coil type: Copper tube, Aluminum fin with ElectroFin E-coated
- Drain connection (requires drain trap): 3/4″ FNPT
- P-Trap required: Yes (included)
- Hanging brackets: included
- Warranty: 5 years on all parts including refrigeration system
Included Items
- Control: Model A77
- Drain fittings: 3/4″ MNPT x 3/4″ BARB, 3/4″ MNPT x 3/4″ Female pipe, 3/4″ FNPT x 3/4″ Female pipe, 3/4″ P-Trap
- Drain tubing (length, ID): 10′ – 3/4″ ID
- Thermostat wire: 30′ 20 gauge 4-wire
Specifications:
- Capacity(1) PPD at 80°/60%RH: 314
- Energy factor(1): 2.6L/kWh – 5.5 pints/kWh
- Voltage, phase, frequency: 277VAC, 1 phase, 60Hz
- Current draw (amps)(1): 9.2
- Power (Watts)(1): 2,450
- Power cord type and length: SJT, L7-20P, 10ft
- Hardwire: Field configurable
- Breaker size: 20 amp
- CFM: 830
- Operating range Temp/RH: 65/50 to 85/80
- Dimensions: 32 5/8″W x 24″H x 24 1/4″L
- Weight: 180 lbs
(1)Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60% Rh inlet air at 0.0 ESP.
(2)Total cooling load.
Out of stock
The Anden Model A320V3 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit. De-humidification occurs until the set point is reached, then shuts off until the control determines a need for operation.
The Anden Model A320V3 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor commercial environment. The Model A320V3 can also be programmed to circulate air within a commercial facility.
Reviews
There are no reviews yet.